Huawei P6 Pro Clone Firmware

Huawei P6 Pro Clone Firmware

E535_8535_W13_V1.0

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Reading Flash Content now ...
xGPT : Normalize settings Ok!

Brand     : Huawei
ProdName  : Huawei
ProdModel : Huawei P6 Pro
Device    : Huawei
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : Android_E535_8535_W13_V1.0

[Read Ok] : preloader_aeon6735m_65u_m0.bin

.
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000   
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Build ID: MRA58K
 Display ID: Huawei P6 Pro_E535_8535_W13_V1.0
 Version: 6.0
 Build Date: Fri Sep 15 10:58:40 CST 2017
 Model: Huawei P6 Pro
 Brand: Huawei
 Device: Huawei
 Manufacturer: Huawei
 Mediatek Version Release: Android_E535_8535_W13_V1.0
 FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
 IMEI[1]: 353232057450001
 IMEI[2]: 353232058991466
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000     
 Start processing nvram
 IMEI[1] from NVRAM: 35323
 IMEI[2] from NVRAM: 3532
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000     
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000     
 Start processing lk
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing secro  secro.img
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000     
 Start processing trustzone
 Start processing frp ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000     
 Start processing nvdata ......
 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000     
 Start processing system
 Reading:  BEGIN: 0xb000000        - LEN: 0x83800000   
 Saved to : C:\Users\Mirza\Documents\Android_MTK\firmware_backup\MT6735M_EMMC_MRA58K__6_0_Huawei P6 Pro_Huawei_2019_11_14_14_10)
 Wait untill phone will start charging.
 [0]All done.

MT6735M_EMMC_MRA58K__6_0_Huawei P6 Pro_Huawei_2019_11_14_14_10)

MT6735M__HUAWEI__Y6_Pro__Y6_Pro__9.0__ALPS.L1.MP6.V2_WEG.L_P73